• No more cracking or breaking a part you spent time repairing, last minute fixes are no longer a headache
• Save bumpers, headlight assemblies or any other thermoplastic part by stitching them together with the DF-400BR Hot StaplerTool
• This tool adds a structural element to cosmetic repairs
• The staples put the original strength back into the part, so now you save parts that would have been thrown away before
• The easy-to-use tool provides flexibility with 3 heat settings

Operation Instructtion:

1. Plug the Power Plug into proper 110V electrical outlet.
2. Turn the Power Control Dial clockwise to set power level using the Power
   Indicator Lights
3. Press the ON/OFF Main Switch to “ON” position.
4. Select a Dent Fix Breakaway StapleClip® and set in the Electrode.
5. Set part to desired position or original shape.
6. Press and hold the Toggle Switch on the Grip and place StapleClip® gently
   against the plastic seam.WHEN PRESSED TO HARD THE STAPLE CAN PENETRATE THE REPAIR AREA. APPLY STEADY, CONTROLLED PRESSURE.
7. When the StapleClip® starts to penetrate the plastic will fold over the silver
   part of the staple. When the staple has set release the trigger and allow staple
   to cool for 2 seconds, then pull away
8. Place StapleClips® at suitable intervals to provide strength to the repair.
9. S and Z StapleClips® maybe given a slight twist at the end of the embeding
   process to lock them lateralerly into the cooler plastic.
10. With a gloved hand simply snap off the Dent Fix Breakaway Staple Clip.
    BE AWARE OF FRAGMENTS. WEAR SAFETY GOGGLES WHEN YOU SNAP OFF STAPLES.
11. Turn unit to “OFF” position when not in use.
12. Grind off excess StapleClip®, if any, using a sander or grinder. Finish with
    putty and paint if necessary.