• Supports drums or rotors up to 100 lb. using the standard 1" (25.4 mm) arbor, or up to 200 lb. using the optional 1.875" (47.63 mm) arbor.
• Two adjustable spindle speeds (if desired) allow for fast turning of small pieces and high-quality turning of larger pieces.
• Two feed rates allow for quick rough-cut and finer finish-cut settings.
• Forged alloy steel arbor – Two tapered mounting surfaces add stability and handle up to 200 lb.
• Feed slide protection keeps travel surfaces free of dirt and chips.
• Negative rake tool bits standard, provide lower cost of ownership.
• Solid twin cutter tool simultaneously resurfaces both sides of rotor.
• Full-drum support hex boring bar guarantees correct tool angle for drums.
• Infinitely variable drum feed from 0.002" to 0.02" per revolution.
• Quick drum-to-rotor changeover.
• User-friendly ergonomics.
• Micrometer-precise depth-of-cut dials embossed in metal and calibrated in both thousandths of an inch and tenths of a millimeter; easy reset to zero.
• Extended spindle increases drum capacity to 9.875".
• Support drums or rotors up to 100 lb. using the standard 1" (25.4 mm) arbor, or up to 200 lb. using the optional 1.875" (47.63 mm) arbor.

Specifications:

• Application: Car & Light Truck
• Volume: High
• Rotors: Yes
• Drums: Yes
• Max Rotor Diameter: 14.5"
• Max Rotor Face Width: 3-3/4"
• Standard Max Arbor Capacity: 100 lbs.
• Heavy Duty Max Arbor Capacity: 200 lbs
• Max Rotor Thickness: 1.875"
• Flywheel Service Capable: Yes
• Spindle Bearings: Bronze Sleeve
• Motor: 1 HP
• Tool Bits (shipped with): Negative Rage
• Double Taper Arbor: Yes
• Spindle Speed: 100, 200 RPM
• Drum Feed Rate:  .002" to .020"/REV
• Max Drum Depth: 6.875"
• Rotor Feed Rate:  .002"/.010"/REV
• Weight: 406 lbs