- 7,000 lb. Capacity
- Heavy Duty
- "Super Tall" Lifting Height
- Extra Wide & Extra Long
- Diamond Plated Runways
- Single Point Release, Pneumatic Locks
- Lock Ladder Design
- Double Lock Safety System
- Steel Approach Ramps Included
- Mounting Hardware Included
- Perfect for Storage or Working on Vehicles
- 220volt/1phase Electric Operation (Requires 30amp Breaker)
- 2 Year Structural/1 Year Hydraulic Manufacturer Warranty
The
Atlas® Garage PRO7000ST is the perfect lift for those car enthusiasts
lucky enough to have extra tall ceilings and need to store regular
height vehicles on top of extra tall vehicles. The PRO7000ST raises
vehicles weighing up to 7,000 lbs. all the way to over 12 feet (144
inches) under the runway.
This super tall four post storage lift
uses the same heavy duty runways as the Atlas® Garage PRO9000. The
runways feature welded tracks which allow the use of a rolling bridge
jack (such as the Atlas® RJ6BK ).
The extra tall lifting height gives customers the space needed to park
much taller vehicles under the vehicle stored on top. There are a
whopping 21 locking positions in the lock ladder, and the lock ladder
may be adjusted during installation giving an almost infinite number of
locking heights.
A single point release toggle (located next to
the power unit) automatically unlocks all four spring loaded pneumatic
locks. Compressed air is required to disengage the locks (air supply not
included). The emergency slack cable secondary lock system is always
“on standby” and will engage automatically if the cables are compromised
or become too slack.
Atlas® Garage PRO7000ST Specifications:
- Capacity: 7,000 lbs
- Lifting Height, Top of Runway: 147" (12' 3")
- Clearance Under Runways: 142" (11' 10")
- Height of Columns: 162" (13' 6")
- Overall Width: 110 1/2" (9' 2 1/2") w/ motor 123" (10' 3")
- Overall Length w/ Ramps: 227 1/2" (18' 11 1/2")
- Runway Length: 194" (16' 2")
- Runway Width: 21"
- Runway Thickness: 4 1/2"
- Width Between Runways: 45" w/ Rail 41 3/4"
- Outside Runway to Outside Runway: 83" (6' 11")
- Clearance Between Columns: 100" (8' 4")
- Length Between Columns: 185" (15' 5")
- Drive Thru: 82 1/2" (6' 10 1/2")
- Motor/Electrical Requirement: 220volt/1phase, 30 amp breaker required
- Oil Requirement: 5 Gallons AW32 or AW46 (NOT INCLUDED)
- Shipping Weight: 2,866 lbs