Just
roll the OTC1590 under the load, adjust the lifting saddles, connect an
air line and squeeze. Just pull a pin and
you can re-adjust the height of the lifting saddles. The width between
them is also adjustable. Saddle width: 29" - 41-3/4"; height: 67-1/2";
width: 41", length: 36" and distance from lift arm to floor support:
12-1/2"
• Precise height adjustment and control.
• Stable 11-7/8” diameter base.
• Adjustable height: 54-1/4” to 80-3/4”.
• Saddle measures: 5-1/4” x 1-1/4”.
• OTC 2 year warranty.
Straight-Blade Hose Cutter
• Cuts rubber hoses ranging from 1/4" to 1-1/2".
• Simply place hose in tool and squeeze handle to cut.
• Replacement steel cutter blade No. 4509-1 is available. No. 4509 – Straight blade hose cutter.
• This tool enables you to quickly check the brake adjustment on class 7 and 8 trucks and trailers having S-cam brakes
• Features a sturdy four position handle to provide the leverage you need at the proper angle
• Works on manual or automatic slack adjusters
• Features five popular “Pickle Forks” in a blow-molded case.
• Used to remove shock linkage, tie rods, and ball joints. Also for general service on many cars and light trucks.
•
Includes: 6531 - Size 11” X 1-1/8” Fork Spread; 6532 - Size 11-3/4” X
1-5/8” Fork Spread; 6533 - Size 11-5/8” X 1-7/16” Fork Spread; 6534 -
Size 16” X 11/16” Fork Spread; 6535 - Size 16” X 15/16” Fork Spread
-
Compact, yet heavy-duty unit designed for the truck and
construction industries; in the shop, roadside, or at the job site.
• Can be operated either manually or pneumatically. Air hose
can swivel in any direction of connection from air source. Minimum air pressure
required is 100 psi. Safety valve prevents overloading.
• Extension screw gives added height when needed.
- Min. Height 9-7/16"
- Max. Height 17-11/16"
- Stroke 5-7/8" Fishing a stubborn o-ring or oil seal out of its seat is easy if you have this pair of picks in your toolbox.Puller will spread from 1-12" to 4-1/4" - Puller blocks are 4-7/8" wide
- Includes two hex head cap screws, 3/8" - 16x3" long
- 5-1/2" long screw
- Weight: 1 lb., 8 oz.
This tool is perfect for removing timing gears, fan pulleys, harmonic balancers and many other parts having tapped holes.
Mechanical Grip-O-Matic Puller
Remove
and install parts for fast, effective repairs. The puller is forged
from quality steel, heat treated, and subjected to rigorous tests which
exceed their rated capacity.
• 5-Ton, 2-Jaw (Reversible Jaws)
• Max. Reach 3-1/4" Max. Spread 6"
• Screw Size 9/16"-20 x 6-15/16"
• Jaw Thickness Upper 5/16" Lower 1/4"
• Jaw Width Upper 3/8" Lower 3/4" - See more at: http://www.otctools.com/products/5-ton-grip-o-matic-puller#sthash.QR33pFnh.dpuf
$0Items0
